Stamping Presses
MECHANICAL, FORGING, & SERVO PRESSES FOR YOUR COMPLETE PRESS-LINE SOLUTION
Known worldwide for quality, reliability and proven performance, Stamtec has built thousands of stamping presses every year for over six decades.
Stamtec, through our parent company, is one of the largest press builders in the world, with more than 60,000 presses sold; 1500 employees; 6,500,000 square feet of manufacturing floor space and with facilities in the U.S., Taiwan, China and Mexico, producing more than 3,000 presses per year.
We are one of the most prominent and proven press manufacturers in the world. Our presses are acknowledged worldwide throughout the metal stamping industry for quality, reliability and proven performance.
For more than 70 years, we have recognized our customers as long-term partners, growing together, and our presses are now operating in over 40 countries around the world. Take advantage of this global strength, and grow with us as we grow with you.
Some points which we believe set us apart from the crowd:
- Stamtec has one of the largest in-stock inventory of mechanical presses in the U.S.
- Stamtec has been in business since 1949 as a mechanical press manufacturer with nearly 40 years in the U.S. market.
- Our presses are manufactured by our own employees in our own factory, and are known worldwide for quality, reliability and proven performance.
- Electrical and mechanical engineers, sales/application and service/support personnel at our 72,000 sq. ft. logistics and assembly facility in Manchester, TN (one hour southeast of Nashville, TN).
We have the capabilities for complete turn-key integration of press, quick die change, coil feedline, transfer system and other peripheral equipment.
We offer competitive pricing for a well-built, high-performance product.
For more information, download our Corporate Catalog.
STAMTEC Metal Stamping Presses
GAP
Straightside
GAP
G2 Series Gap Frame Press
The Stamtec G2 series two-point gap frame press (a.k.a. OBG, OBS, OBI, or C-frame) is designed for stamping relatively long, narrow parts at high single-stroking rates or in continuous mode, using either blanks or coil stock.
Learn More
OCP Series Gap Frame Press
The Stamtec OCP one-point gap frame press (a.k.a. OBG, OBS, OBI, or C-frame) is designed for stamping small parts at high single-stroking rates or in continuous mode, using either blanks or coil stock.
Learn More
Straightside
GTX Series 2-Point Straight Side Press
The Stamtec GTX two-point straight side press (a.k.a. double crank press) is designed for stamping relatively long, narrow parts at high single-stroking rates or in continuous mode, using either blanks or coil stock; or running progressive dies that need the longer bed area to accommodate long dies with multiple stations.
Learn More
S2 Series 2-Point Straight Side Press
The Stamtec S2 two-point straight side press (a.k.a. double crank press) is designed for stamping large parts or ones that require a large bed area to accommodate progressive or transfer dies.
Learn More
Mechanical Gap Frame Press | Single Point | 35 – 250 Metric Tons Capacity
AIDA NC1 Single Point Gap
Frame Press Like all AIDA NC-series gap frame presses, the NC1 Single Point Gap Frame Press uses a welded steel frame, cast iron slide, and over-sized cast steel bolsters. This enables the press to deliver angular frame deflection that can be as little as 1/3 of competitive models, ensuring longer die life and higher part quality.
Learn More
Mechanical Gap Frame Press | Two Point | 110 – 250 Metric Tons Capacity
AIDA’s Best Selling, High Precision, Gap Frame Press
The AIDA NC series single and double crank gap frame presses are probably the most imitated stamping presses in production today.
Learn More
Servo Press | Gap Frame | 80 – 250 Metric Tons Capacity
AIDA is the leading servo press manufacturer and was the pioneer of Direct Drive Servo Technology over a decade ago. AIDA was the first press manufacturer to use a direct drive servo system for stamping presses which represents the first fundamental change in the metalforming industry in more than 30 years.
Learn More
UNITIZED
AIDA NS1 Single Point Unitized Straightside Press | 80 – 200 Metric Tons
The AIDA NS1 straightside press, available in both crank and link motion models, has a unitized straightside frame construction which reduces deflection and enables high-precision forming. Features such as centered and full length slide guides, a forced recirculating lubrication system, AIDA’s Hydraulic Overload Protection System, and more make the NS1 a high performance stamping machine.
Learn More
AIDA NS2 Two Point Unitized Straightside Press | 110 – 300 Metric Tons Capacity
Unitized straightside frame for minimal frame elongation. The NS2 Series is available in both crank motion and link motion models. The AIDA NS2 has a unitized straightside frame for minimal frame elongation (up to NS2-2500, NS2-3000 frame assembly construction tightened by tie rod).
Learn More
AIDA NSU Two Point Unitized Straightside Press | 200 – 400 Metric Tons Capacity
Same quality and engineering as our other stamping presses, just a few less bells and whistles. 200 to 400 metric ton rating (10% more capacity right out of the box). Designed and constructed for easy, low-cost maintenance.
Learn More
PROGRESSIVE
AIDA PMX Progressive Die Press | Straightside | 300 – 1000 Metric Tons Capacity
The more accurate your stamping press is the longer the tooling will last – and the parts you produce will be of better quality for longer runs. AIDA’s unique slide link motion design minimizes heat and vibration found in dies run in conventional crank or eccentric shaft presses.
Learn More
AIDA NSU Progressive Die Press | Straightside | 200 – 400 Metric Tons Capacity
Same quality and engineering as our other stamping presses, just a few less bells and whistles. 200 to 400 metric ton rating (10% more capacity right out of the box). Designed and constructed for easy, low-cost maintenance.
Learn More
TRANSFER
AIDA SMX Eccentric Gear Transfer Press | Straightside | 300 – 2000 Metric Tons
AIDA’s SMX Series provides uncommon rigidity and precision in a general purpose, straightside press. Because of the high durability design and large front to back bed areas, SMX presses excel in demanding, non-stop production environments that involve large scale parts requiring deep draw stroke lengths and high production rates such as those common in automotive, appliance, furniture and other industries.
Learn More
LARGE CAPACITY
AIDA S1-E Heavy Stamping Straightside Press 300 – 500 metric tons capacity
The S1-E Series Heavy Stamping Press from AIDA expands the range of high-accuracy, heavy stamping by achieving three important elements in the stamping of thick plate:
■
Extends the die life
■
Reduces vibration and noise
■
Maintains high accuracy and high productivity
Learn More
TIE ROD FRAME
AIDA MCX Two Point Straightside Press | 315 – 1250 Metric Tons Capacity
Single or Double Gear, 1/4 or 1/2 inch rating points, Mechanical or Servo. The MCX Series from AIDA offers the highest level of customization through multiple configurations. What does this mean for your stamping operation?
Learn More
AIDA NST Two or Four Point Straightside Press | 300 – 1200 Metric Tons Capacity
Created to meet your conventional stamping press requirements in the most unconventional ways. High-end features with low-end pricing. The AIDA NST press is conventional in name and price only. No glitz, just guts, the NST press was created for high performance, multi-purpose work with the same attention to detail, quality and engineering as every other AIDA solution.
Learn More
SERVO PRESSES
AIDA DSF-M2 Straightside Servo Press | 315 – 1250 Metric Tons Capacity
With its first servo press produced in 1996, AIDA SERVOPRO® presses have proven their reliability time and again in over 800 installations worldwide. Throughout these years, and thanks to our customers’ valuable feedback, AIDA has increased the understanding of servo drive technology for daily production use.
Learn More
AIDA DSF-N1 Straightside Servo Press | 80 – 300 Metric Tons Capacity
Featuring the AIDA Servo Press Drive technology that revolutionized the metalforming industry:
Imagine being able to dial-in the stroke, velocity and dwell profile for any job . . . blanking, drawing, high precision, exotic materials . . . all on one press. With AIDA DSF Servo Press technology, you can have each press you own performing like multiple presses . . .
Learn More
High Speed Press | Motor Lamination | 125 – 400 Metric Tons Capacity
Optimum Speed Without Reducing Stroke LengthCheck your dies and we bet you’ll find that the majority of them probably don’t require an adjustable stroke press. The exceptional design of the AIDA HMX high speed stamping press allows it to run at optimum speed without reducing the stroke (how does 1500 spm at 1.25″ stroke sound?)
Learn More
High Speed Press | Multi Suspension | 200 – 400 Metric Tons Capacity
Advancing To an Even Higher StageWith the MSP high speed stamping press, dynamic accuracy is significantly improved because of the compact design and multiple suspension points. A balance between high rigidity and a wide bed area is brought to a higher level using the latest technology.
Learn More
Need more help?
Our knowledgeable team is standing by to help you find solutions.
Call us now